Hornady 9mm Luger Custom Grade New Dimension Nitride 3-Die Set
$119.75
Product Information
Hornady’s CGND sizing dies feature a TiN (Titanium Nitride) coated sizing ring. This ring eliminates case sticking and requires no lubrication. The super hard, smooth coating is used in high-pressure, high-wear tools to reduce abrasion, so it’s perfect for resizing pistol brass and won’t scratch your cases. Less friction also means less wear on cases, for longer case life. Internal die profiles are also precision machined and polished to a smooth finish that delivers reliable function without case sticking.
The Zip Spindle design on the size die positively locks to eliminate slippage. A series of light threads cut on both the spindle and spindle collet allows incremental adjustments by turning the spindle or you can easily “zip it” up or down for larger movements.
Superior to “ball expanders,” the elliptical expander used by Hornady provides extremely smooth neck sizing and significantly reduces friction and case neck stretch. Internal threading prevents it from pulling loose, and the elliptical expander also eliminates the need for a separate expander die for necking-up to the next caliber.
Hornady’s seating system holds the bullet, case neck and seating stem in perfect alignment in the sleeve BEFORE the bullet enters the neck of the case. The system includes a floating bullet alignment sleeve, a floating steel seating stem and a built-in crimper for benchrest precision. Bullets are aligned in the sleeve as they enter the die for optimum seating and enhanced accuracy. The built-in crimper gives you the option of crimping without the need for an extra crimp die, saving a station on your press.
Also included, Hornady Sure-Loc lock rings clamp around the entire die applying constant pressure across the threads to hold the ring in place. The locking screw tightens the ring without ever coming into contact with the threads, eliminating possible damage.
Packaged in a plastic storage box with three Sure-Loc Rings. Shellholder sold separately.
Features:
- Titanium Nitride sizing ring means no case lube required!
- Easy adjustment for precise sizing, expanding, decapping and bullet seating
- Includes 3 Sure-Loc die locking rings
3 in stock
Product Information
Hornady’s CGND sizing dies feature a TiN (Titanium Nitride) coated sizing ring. This ring eliminates case sticking and requires no lubrication. The super hard, smooth coating is used in high-pressure, high-wear tools to reduce abrasion, so it’s perfect for resizing pistol brass and won’t scratch your cases. Less friction also means less wear on cases, for longer case life. Internal die profiles are also precision machined and polished to a smooth finish that delivers reliable function without case sticking.
The Zip Spindle design on the size die positively locks to eliminate slippage. A series of light threads cut on both the spindle and spindle collet allows incremental adjustments by turning the spindle or you can easily “zip it” up or down for larger movements.
Superior to “ball expanders,” the elliptical expander used by Hornady provides extremely smooth neck sizing and significantly reduces friction and case neck stretch. Internal threading prevents it from pulling loose, and the elliptical expander also eliminates the need for a separate expander die for necking-up to the next caliber.
Hornady’s seating system holds the bullet, case neck and seating stem in perfect alignment in the sleeve BEFORE the bullet enters the neck of the case. The system includes a floating bullet alignment sleeve, a floating steel seating stem and a built-in crimper for benchrest precision. Bullets are aligned in the sleeve as they enter the die for optimum seating and enhanced accuracy. The built-in crimper gives you the option of crimping without the need for an extra crimp die, saving a station on your press.
Also included, Hornady Sure-Loc lock rings clamp around the entire die applying constant pressure across the threads to hold the ring in place. The locking screw tightens the ring without ever coming into contact with the threads, eliminating possible damage.
Packaged in a plastic storage box with three Sure-Loc Rings. Shellholder sold separately.
Features:
- Titanium Nitride sizing ring means no case lube required!
- Easy adjustment for precise sizing, expanding, decapping and bullet seating
- Includes 3 Sure-Loc die locking rings
| Weight | 2 lbs |
|---|
Related products
LEE – 40 S&W/10MM CARBIDE DLX 4 DIE SET w/Dipper & #R19 S/H
Product Information
By separating the seating and crimping operation, you will benefit by a greatly simplified adjustment. More importantly, the Carbide Factory Crimp Die post sizes your case assuring you that any round that passes through the die will chamber properly in your gun. Includes: Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Factory Crimp Die, Shellholder, Powder Dipper and Load Data.
LEE – 455 WEBLEY MARK-II CARBIDE 3 DIE SET w/Dipper & #R5 S/H
Product Information
We use a solid carbide insert, ground to a special contour that does not leave a belt mark on the case like other carbide dies. With a carbide sizer, no case lube is needed. Sizer also features an unbreakable decapper and built-in stuck case remover. The Powder Through Expanding Die permits charging the case while expanding the case mouth. The Bullet Seat and Feed Die features a free floating bullet seater to insure maximum accuracy. Includes: Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Shellholder, Powder Dipper and Load Data. The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information:Material:
•Steel
Die Types Included
•Carbide Full Length Sizing Die with Decapping Unit
•Powder Through Expanding Die
•Bullet Seating Die
Accessories: •Plastic Container
•Shellholder
•Powder dipper
•Load data sheet
Notes:
•Adjustable crimp from slight taper to full roll
LEE – 9MM LUGER CARBIDE DLX 4 DIE SET w/Dipper & #R19 S/H
Product Information
By separating the seating and crimping operation, you will benefit by a greatly simplified adjustment. More importantly, the Carbide Factory Crimp Die post sizes your case assuring you that any round that passes through the die will chamber properly in your gun.
Includes: Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Factory Crimp Die, Shellholder, Powder Dipper and Load Data.
Lee 32acp Carbide 3-Die Set
Product Information
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Notes: Adjustable crimp from slight taper to full roll
Lee 38 S&W Carbide 3-Die Set
Product Information
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Notes: Adjustable crimp from slight taper to full roll
LEE 380 ACP CARBIDE 3 DIE SET, S/H #4
Product Information
We use a solid carbide insert, ground to a special contour that does not leave a belt mark on the case like other carbide dies. With a carbide sizer, no case lube is needed. Sizer also features an unbreakable decapper and built-in stuck case remover. The Powder Through Expanding Die permits charging the case while expanding the case mouth. The Bullet Seat and Feed Die features a free floating bullet seater to insure maximum accuracy. Includes: Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Shellholder, Powder Dipper and Load Data.
